This tutorial was written by Me,On 8/27/13.

Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.

It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
  You will need the Pay to use kit Witchy Woman, by InzpiredCreationz

The font I used is Fontdinerdotcom Huggable

Ok Ready?

Open Frame #1

Shift - D to duplicate and close the original.

Re-size the canvas to 800 by 800.

With your magic wand,click inside the frame and 

expand the selection,by4. 

 Add a new layer and drag it beneath the frame layer,

paste a paper of choice into the selection into selection.

Select none.

Add some elements from the kit and position 
them as desired. 

Be sure to add the Witchy Woman word art.

Add your tube and your © as well as your taggers mark now.

 Add your name in your choice of font and 

add your favorite text effects.

Crop the extra canvas away from your tag.

Save as a png and your done!

Thanks for trying my tutorial!

I would love to see your results!

This tutorial was written by Me,On 8/27/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
  You will need the Pay to use kit Sea Adventure, by InzpiredCreationz

Shift + D to duplicate and close the original.

Re-size the canvas to 800 by 800.

With your freehand selection tool. set to point to point,

draw a selection around the frame,

add a new layer and drag it beneath the frame layer,

paste the Water element into selection.

Select none.

Add some elements below the frame so they kind of look like they are in the water,

And add some on top of the frame.

Add the sand and then some elements like the shells.

Add the banner and after its positioned,

add your name in a font of choice.

You may need to duplicate the banner if you have more than 5 letters in your name.

Or place your name somewhere else.

Add some text effects.
Crop the extra canvas away from your tag.
Save as a png and your done!
Thanks for trying my tutorial!
I would love to see your results!

This tutorial was written by Me,on 8/27/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
  You will need the Pay to use kit Urban Jungle, by InzpiredCreationz
You can purchase  it  at:  Pimp My Tags W/ Scraps
A font of choice,the font I used is Waters Gothic
Ok Ready?
Open a new transparent image 800 by 800.

Add one of the grunge smears and rotate it left by 20.

Add the frame circle

Grab your magic wand and click inside all three frames.

Expand the selection by 12.

Add a new layer and paste a paper of choice into the selection.

Select none and drag the paper layer below the frame layer.

Paste heart #2 as a new layer and rotate it as desired.

Arrange these 3 layers as desired.

and when your happy with them,

merge them.

Paste your tube as a new layer and add a shadow to it.

Add your copy wright bow and your taggers info.

Add some of your favorite elements from your kit.

Add your name in a font of choice and add your favorite

text effects, I used eye candy Bevel boss and gradient glow.
Crop the extra canvas away from your tag.
Save as a png and your done!
Thanks for trying my tutorial!
I would love to see your results!

 

This tutorial was written by Me.

On 8/27/13.

Please don't copy it or claim it as your own or post it through any group.

You may link back to my blog.

Any resemblance to any other tutorial is strictly coincidental.

It is written assuming you have a basic knowledge of psp and its tools.

It is written using psp X5 but should work in any other version.

The font I used is Badaboom

Ok Ready?

Open frame #05. Shift D to duplicate it and close the original. Select all, float and defloat.

Paste a paper of choice into selection.

Select none.

Add a drop shadow of choice.

Now with your rectangle selection tool, draw a selection around the frame. Paste a paper of choice as a new layer and drag it below the frame layer, Invert selection and hit delete on your keyboard.

Go image, canvas size and enlarge your canvas to 800 by 800.

Paste aper-back as a new layer and drag it below the paper layer. 

Merge the two frame layers and the paper layer.

Now you can move it around where you want it.

Paste your favorite elements from the kit and apply a shadow to each.

Paste your tube and position it as desired.

Add your name in your choice of font and add your 

favorite text effects.

Dont forget to add your © now.  Add your taggers mark now. 

Crop the extra canvas away from your tag.

Save as a png and your done!

Thanks for trying my tutorial!

I would love to see your results!

This tutorial was written by Me, on 8/27/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
  You will need the Pay to use kit Good Girl- Bad Girl Combo, by pimp'd designz
You can purchase  it  at:  Pimp My Tags W/ Scraps
A font of choice,The font I used is Badaboom

Ok Ready?

Open ribbon #05. Shift D to duplicate it and close the original. Re-size just the ribbon by 85%.

Add a drop shadow of choice.

Open Frame #02. Copy and paste it as a new layer.

Repeat the re-size on this layer also.

Grab your magic wand and click inside the frame.

Expand the selection, add a new layer and drag it below your frame layer.

Paste a paper of choice into selection and select none.

Add a shadow to the frame.

Now repeat the above step with your tube.

But apply a high pass sharpen to the tube.

Merge the frame paper and tube layers.

Add your favorite elements from the kit.

Add your name in your choice of font and add your favorite effects.

Crop the extra canvas away from your tube.

Save as a png and your done!

Thanks for trying my tutorial!

I would love to see your results!

 

This tutorial was written by Me,on 8/27/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
  You will need the Pay to use kit School Days Bundle, by Candy Cats
you can purchase  it  at:  Pimp My Tags W/ Scraps

Ok Ready?
Open one of the round frames, Shift D to duplicate and close the original.

Re-size, all layers checked to 800 by 800.

Click inside the frame and expand the selection.

Paste a paper of choice as a new layer, invert the selection and hit delete on the keyboard.

Add a shadow to the frame.

Now add some elements from the kit.

Add some beneath the frame and on top or add all on top of the frame.

Add your tube as I did on the bottom tag, i applied the high pass sharpen after re-sizing the tube.

Be sure to apply your ©.

and your taggers mark.

Add some word art from the kit or add some text of your choice.

Add your name in your choice of font and dont forget to add some text effects.

On the bottom tag, I used eye candy and applied a bevel boss and a grad glow.

Crop the extra canvas away from your tube.

Save as a png and your done!

Thanks for trying my tutorial!

I would love to see your results!

This tutorial was written by Me.
On 8/27/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
You will need the Pay to use kit School Days Bundle, by Candy Cats
You can purchase it at
Pimp My Tags W/ Scraps
A font of choice
The font I used is Badaboom
Filters Unlimited - Aged film (Optional)

Ok Ready?

  Open a new image, transparent, 800 by 800.

Select all and paste a paper of choice into the selection. Select none,

Load your mask and merge the group.

Apply a texture of choice. I used Filters unlimited, Aged film

With these settings:

Grab your elipse tool and draw a large circle around the mask layer, I made mine a little smaller than the mask.

While its still a vector. Grab your text tool and move your cursor over the elipse until

you see the half circle icon.

Begin typing your text of choice. Type it a couple of times. Then move your cursor to the first letter and use your 

space bar to space the text over to where you like it.

Once your happy with it, go to the layer palette,

Click the + beside the layer and you will see a few layers drop down. 

Click the eye beside the circle you drew to hide it.

Now convert the layer to raster and add an inner bevel.. and a drop shadow.

Now add some elements from the kit and add your name in your choice of font.

Apply your favorite text effects.

Crop the excess canvas around your tag. 

Save as a png, and your done!

Thanks for trying my tutorial.

I would love to see your results!

This tutorial was written by Me, on 8/24/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
  You will need the Pay to use kit , by TKDezigns
you can purchase  it  at : Creative Design Outlet
You will need several tubes by the same artist.
I'm using a tubes by Suzanne Woolcott which you can get at: Gorjuss Art
A font of choice,the font I used is Cutie Patootie
Mura's Miester- Copies

Ok Ready?
  Open frame #1, copy and close it.

Open a new transparent image, 700 by 700.

Paste the frame as a new layer and re-size it by 45%.
Duplicate it twice. Position all 3 of them in a line across the canvas.
When your happy with them, merge them together.

Grab your rectangle selection tool and draw a rectangle around the frames,
add a new layer and paste a paper of choice into the selection.
Select none and drag the paper layer below the frame layer.

Add a shadow to the frame. Add your two close up tubes beneath the frame layer.
Position them and use your selection tool, to select the parts of the tubes
 that don't fit into your frames. 
Once selected hit delete on your keyboard. Apply the high pass sharpen to your tubes.

Paste your standing tube on top of the frame layer and repeat the sharpen.

One of the frames will be empty now, Use a small font and type some text of your choice.

Duplicate it several times and move them so they will fit inside the frame,
or use Mura's Miester copies.

Add some elements from the kit. Add some on top of the frame and some beneath it.

Use your rectangle selection tool again to draw a selection as large as the frame layer,

paste a paper of choice as a new layer and invert the selection.

Hit delete on your keyboard.

Select none and move the paper down and a little to the side of the frame layer.

Add © and your taggers mark.

Add your name in your choice of font and add your favorite text effects.

Crop the excess canvas around your tag.
Save as a png, and your done!
Thanks for trying my tutorial.
I would love to see your results!

 

This tutorial was written by Me.

On 8/24/13.

Please don't copy it or claim it as your own or post it through any group.

You may link back to my blog.

Any resemblance to any other tutorial is strictly coincidental.

It is written assuming you have a basic knowledge of psp and its tools.

It is written using psp X5 but should work in any other version.

The font I used is True Stories

AAA filters -Textures

Ok Ready?

  Open a new transparent canvas, 700 by 700.

open  element # 61, Copy and paste it as a new layer.

Now activate raster 1 and select all, activate the element layer and

crop to selection. Open element 36, copy and close it.

Back on your tag image again and activate raster 1 again.

Select all, paste the frame into selection.

Selections float and de-float. Now paste a paper of choice as a new layer.

selections invert and hit delete on your keyboard. Delete the frame layer. Rotate left by 25. Duplicate it and rotate to the right by 45. 

Grab your magic wand and click inside one of  the frames, expand the selection by 3. Add a new layer and paste a paper of choice into selection. 

Drag below the frame layer and select none.

Go to effects and apply AAA filters texture with these settings:

 

  Repeat this with the other frame.

Add your tube Re-size and rotate as you did the frames. First one way, duplicate and then rotate it for the other frame.

Sharpen it and go to adjust and sharpen 

High pass sharpen with these setttings:

 

  Repeat this step with the other tube.

Now its time to personalize your tag.

Add your favorite elements from the kit. Add your name  Using all Caps to get the pretty letters.

Add your favorite text effects.
Don't forget to add © and your taggers info. 

Save as a png, and your done!

Thanks for trying my tutorial.

I would love to see your results!

 

This tutorial was written by Me.

On 8/22/13.

Please don't copy it or claim it as your own or post it through any group.

You may link back to my blog.

Any resemblance to any other tutorial is strictly coincidental.

It is written assuming you have a basic knowledge of psp and its tools.

It is written using psp X5 but should work in any other version.

Hot Pink
and Sugar Pie

And a round mask.

I used WSL Mask 352

Ok Ready?

  Open a new transparent canvas, 700 by 700.

Select all and paste a paper of choice into the selection. 

Select none. Load the mask and merge the group.

Duplicate. 
Go image canvas size and enlarge the canvas to 800 by 800. 
Add a blurr of choice to the bottom mask layer.
Duplicate the bottom layer and colorize to a sky blue or color of choice.
Sharpen the top mask layer and add a shadow.
Merge visible.
Paste frame #3 as a new layer, position in the middle and re-size by 75%
Grab your magic wand and click inside both frames.
Expand the selection by 3.
Paste paper # 21 as a new layer, Invert the selection snd hit delete on your keyboard.
Drag the paper layer below the frame layer.
Paste your tubes.
Re-size, sharpen and add a shadow to each.
Add © and your taggers mark.
Add a few elements from the kit.
Type your text and use a few different fonts.
Add your favorite text effects.
Add your name and your favorite text effects.
Save it as a png and your done!
Thanks for trying my tutorial!
Id love to see your results!
Hugs from Kel!

 

This tutorial was written by Me.

On 8/22/13.

Please don't copy it or claim it as your own or post it through any group.

You may link back to my blog.

Any resemblance to any other tutorial is strictly coincidental.

It is written assuming you have a basic knowledge of psp and its tools.

It is written using psp X5 but should work in any other version.

The font I used is Candy Store

You will also need a fat font of Choice.

And a round mask.

I used KyLie mask 05

I wish I could provide the link for it but I cant find it.