This tutorial was written on 06-09-15 By Kelli.

Please don't copy it or claim it as your own or post it through any group.

You may link back to my blog.

Any resemblance to any other tutorial is strictly coincidental.

It is written assuming you have a basic knowledge of psp and its tools.

It is written using psp X5 but should work in any other version. 

You will need the tube Michelle by Todd Borenstein

Add some noise to the three rectangles or an effect of your choice,

And now your done!

Thanks for trying my tutorial!

I hope you are happy with your results!
I would love to see them!

Please don't copy it or claim it as your own or post it through any group.

You may link back to my blog.

Any resemblance to any other tutorial is strictly coincidental.

It is written assuming you have a basic knowledge of psp and its tools.

It is written using psp X5 but should work in any other version.

Open frame #2.

Shift +D to duplicate, close the original.

Re-size canvas to 650 by 650.

Paste the tube as a new layer. Position in the center of the frame.

Once you are happy with the positioning, drag below the frame layer.

Grab your selection tool set to rectngle.

Select the top of the tube, once happy with the selection. Right clock on the layer on the layer

pallette. and promote selection to layer.

Drag the promoted selection above the frame.

Select none. Grab your magic wand and click inside your frame to select the inside.

Expand the selection by 3.

Paste a paper of choice as a new layer and drag it to the bottom.

Invert the selection and hit delete on your keyboard.

Add a drop shadow to the original tube layer, sharpen the frame layer and

add a drop shadow.

Now merge these 4 layers.

Paste element   # 153 and drag it to the bottom.

Position it in the upper right corner.

Sharpen more and add a drop shadow.

Add the steampunk word art and position it to the bottom of the frame.

Add element #136 and drag it below the word art.

Add your favorite elements from the kit

Position resize and sharpen and shadow to each element.

Add the ©, scrap kit info and your tagggers info.

Be sure to add your license number.

Save it as a png.

Add your name.
I used an alpha but if you prefer use your favorite steampunk themed font.

And your favorite text effects.

And now your done!

Thanks for trying my tutorial!

I hope you are happy with your results!
I would love to see them!

I made this tag using the tube by Russ Docken

called Burden Basket

You can purchase the tube and a license at

Artistic Dreams Imaging

This tutorial was written on 05-30-15 By Kelli.

Please don't copy it or claim it as your own or post it through any group.

You may link back to my blog.

Any resemblance to any other tutorial is strictly coincidental.

It is written assuming you have a basic knowledge of psp and its tools.

It is written using psp X5 but should work in any other version.

Save as a png.

And now your done!

Thanks for trying my tutorial!

I hope you are happy with your results!
I would love to see them!

This tutorial was written on 05-30-15 By Kelli.

Please don't copy it or claim it as your own or post it through any group.

You may link back to my blog.

Any resemblance to any other tutorial is strictly coincidental.

It is written assuming you have a basic knowledge of psp and its tools.

It is written using psp X5 but should work in any other version.

Open the note scatter and shift +D to duplicate.

And now your done!

Thanks for trying my tutorial!

I hope you are happy with your results!
I would love to see them!

This tutorial was written on 05-27-15, By Kelli.

Please don't copy it or claim it as your own or post it through any group.

You may link back to my blog.

Any resemblance to any other tutorial is strictly coincidental.

It is written assuming you have a basic knowledge of psp and its tools.

It is written using psp X5 but should work in any other version.

You will also need a font of choice. 

New image 650 by 650.

Paste a paper of choice as a new layer.

Re-size by 65%, Rotate left by 15 degrees.

Oaste another paper and re-size it also by 65%.

And paste a third paper and re-size it as aove and rotate it 15 degrees tot he right. 

Effects, edge effects enhance.

Paste the flag element # 43 as a new layer. Re-size by 90%, sharpen and add a drop shadow of choice.

 Paste the white stars(89) as a new layer, add a drop shadow of choice.

Paste element #68 as a new layer and re-size it by 85%. sharpen and add a shadow.

Add a new layer and select all.

Paste the big red heart  ( #86) into selection.Select none and resize it by 90%. Sharpen more and add a drop shadow.

Paste #77 as a new layer and re-size it by 75%.

Rotate it to the right by 12.

Paste element #91 as a new layer.

Now add the statue of liberty as a new layer. 

Re-size it by 75%.

Add one of the clusters.

Layer #2, the one with the shadow already added.

Resize it by 65%.

Add the tube as a new layer and position.

Sharpen and add a shadow of choice.

paste the dog tags #48, rotate them by 90 and then flip. Position them at the bottom of the tube.

Sharpen and add a drop shadow of choice.

Add the ©, scrap kit info and your tagggers info.

Be sure to add your license number.

Save it as a png.

Add your name.

And your favorite text effects.

And now your done!

Thanks for trying my tutorial!

I hope you are happy with your results!
I would love to see them!

This tutorial was written on 5-20-15 By Kelli.

Please don't copy it or claim it as your own or post it through any group.

You may link back to my blog.

Any resemblance to any other tutorial is strictly coincidental.

It is written assuming you have a basic knowledge of psp and its tools.

It is written using psp X5 but should work in any other version.

Paste one of the round frames into selection.

Select none and resize it by 75%, sharpen it and then add a drop shadow.Grab your selection tool set to circle.

Draw a selection large enough to cover the inside of the frame.

Add a new raster layer and drag in below the frame.

Paste a paper of choice into the selection.Select none.

Position the paper in the center of the canvas.

Add some effects if desired.

Add the tube and drag it above the frame layer.

Add an inner bevel to the tube using these setttings:

 and add this drop shadow:

 Decorate the tag with more elements from the kit.

Here is what I did.

Ribbon pasted and positioned at the botttom of the tube.

Then I pasted one of the cupcakes and re-sized

it by 40%

I rotated it right by 11 degrees twice.

And positioned it at the end of the ribbon.

I added this drip shadow:

The beads I re-sized by 35%.

As well as the flowers and the candy and one of the butterflys.

I rotated the butterfly as above and added the same inner bevel.

I added the same drop shadow to all the elements.

Position everything and when happy, add your copywright info.

Taggers info and the scrappers info.

Now just add your name and save it

And now your done!

Thanks for trying my tutorial!

  You will need the scrap kit : Rainbow Bridge, By  Devilish Dezines.

Purchase both at Artistic Dreams Imaging

Ok, ready?

Open Element # 47,Grass.

Shift + D to duplicate and then close the original.

Re-size, all layers checked, to 650 pixel wide.

Then goto canvas size and resize the canvas to 650 wide and 600 tall.

Bottom center.

Sharpen and shadow of choice.

Paste the tube as a new layer, resize it by 65% and then by 85%,

Position it over the grass layer, sharpen and add a shadow.

Paste element #42 as a new layer, re-size it s desired. Sharpen and add a shadow. Its the butterflies.

Paste element 37 as a new layer, paste and position as desired.

Then add one of the cloud tubes,

No re-sizing just position.

Add the sun which is element # 25.

Add the truck number 38 as a new layer. Drag it to the bottom, re-size as desired and be sure to 

add a shadow of choice. Add element #46. Its the grass with the mushroom. Re-size it and place it in front of the truck.

Add a new layer and select all,

Paste the purple tree into selection.

Do not deselect, Add a new layer and drag it to bottom.

Paste a paper of choice into selection.

Now you can select none.

Paste the daisy as a new layer on top of the tube.

Re-size as desired and rotate it so nothing is covering the tubes face.

Sharpen and add a shadow.

Add your name in your favorite font and then apply your favorite text effects.

Save as a png.

  You will need the scrap kit : Steampunk Alice, By  Ginnibug Designz

Purchase both at Artistic Dreams Imaging

Ok Ready?

Open Sa1 shift +D to duplicate and then close the original.

Canvas sign 650x650. frame in middle lower.

Paste the tube and drag it to the bottom. Re-size it by 65%. Move the frame up a little,

And place the tube so part of the tube peeks out the bottom of the frame.

Activate the tube layer and grab your freehand selection tool and select the upper part of the tube.

See this screen shot

Promote the selection and drag the promoted selection above the frame layer.

Select none.

Activate the frame layer.

Grab your magic wand and click inside the frame

And add a new layer.

Drag it to the bottom.

Expand the selection by 3.

Paste a paper of choice into the selection.

Select none.

Add a shadow to the original tube layer.

Merge visible.

Paste Sa33 as a new layer above the merged layer.

Re-size it 75%. Position it as desired and add a drop shadow.

Add a new layer, select all.

Paste Sa21 into selection.

drag it to the bottom.

Sa27 as a new layer, re-size 75%.

Then paste Sa22 as a new layer, position and then sharpen ore and add a drop shadow.

Paste Sa9 as a new layer. and drag it to the bottom.

paste ele Sa14 as a new layer and drag it just below alice.

Add a shadow.

Past ele Sa19 as a new layer.

Drag it to the bottom.

Position it and sharpen, add a shadow

Add a new layer and drag it to the bottom.

Select all and paste a paper into the selection.

Select none..

Add the © for the artist and also add the

scrap kit designers info also.

Add your name in your favorite font and then apply your favorite text effects.

Save as a png.