Layouts by Millie
I CT For
blog train
Wednesday, July 31, 2013
Amazing
This tutorial was written by Me.
On 7/31/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
You will need the Pay to use kit, Acid Camo,
and Acid Camo extras. Designed by Caroline B.
You can check out her blog Here.
You will need a tube of choice.
Im using one by Zlata_M.
You have to have a license to use her tubes or images.
Purchase her tubes here
The font I used is Cute Monster
Ok Ready?
1. Open Splash, Shift D to duplicate. Rotate left by 90.
Re-size, all layers, to 700 pixels wide.
2. Go image canvas size 700 by 700 center.
3.Paste the journaling as a new layer and re-size it by 25%.
4.Add the frame,
re-size by 25%. Rotate left by 20.
5 . Activate the journaling layer, select all, float, and de-float.
Contract selection by 15.
Move the splash above the journaling,
invert and hit delete on the keyboard.
Add a drop shadow.
6. Activate the frame layer, grab your magic wand
click inside the frame, expand the selection by 4.
Paste a paper as a new layer, position and invert the selection.
Make sure the paper layer is active and hit delete on the keyboard.
Drag it below the frame layer.
7. Add the flashlight. Re-size by 45% and again by 75%. Sharpen more and add a shadow.
Drag it to the bottom layer.
8. Add the leaf, resize it by 15. Rotate right by 45.
Duplicate, flip and mirror.
Re-size the duplicate again by 75%. Rotate to the left by 45.
This layer goes just below the frame. The bigger leaf is just below the journaling layer.
9. Add the garland, re-size by 35%, twice.
Duplicate and on the duplicate change the blend mode to multiply.
Merge down. Duplicate, Mirror and flip. Position both of them one on either side of the journaling.
Merge down and sharpen.
10.Add the parenthesis, position them as desrired. I rotated them both to the
right by 45%.
11. Activate, the frame layer, Grab your magic wand and click inside the frame again.
add a new layer and drag it below the frame layer. Add eye candy glass, set to snow.
select none.
12. Add your main tube and position. Add a shadow.
13. Add a close-up tube below the glass layer.
13. Add a close-up tube below the glass layer.
Sharpen more and add a shadow.
14. Activate the glass layer, select all, float and de-float. Expand the selection by 3. Invert the selection,Back on the close-up tube hit delete and select none.
15. Grab your text tool and your chosen font. I chose,
Cute Monster size 30. Add your text and your favorite text effects.
16. Re-size all layers to 500 pixels.
17. Add your copy wright and your taggers mark now.
18. Add your name, and add some effects to the name.
19. Save as a png,
And your done!
And your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Ascension
This tutorial was written by Me.
On 7/31/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
You will need the Pay to use kit, Ascension, designed by Designs by Sarah.
You can purchase it here,
You can check out her blog Here.
You will need a tube of choice.
Im using Suzanne Woolcott.
You have to have a license to use her tubes or images.
Purchase her tubes here
The font I used is Good Day
I used this word art,
I cant remember where I got this word art.
If you can tell me, please do so I can
give credit where credit is due
Ok Ready?
1. Open a new image, 600 by 700, Flood fill any color, to make it easier to see what your doing.
Some of the elements are very light in color, so I recommend a dark color.
2. Add smear #1, Re-size it by 85%, rotate it left by 20%.
Duplicate it once. On one of these layers, mirror and flip it.
Move the mirrored one to the bottom corner, and the other one goes to the top
in the opposite corner.
3. Add one of the scatters, I used scatter #1. Sharpen it.
4.Add frame #4,
Sharpen.
5 . Grab your magic wand and click inside each of the 3 frames.
Expand the selection by 4.
6. Paste a paper of choice as a new layer.
Invert selection and hit delete on your keyboard.
7. Now add your tubes of choice.
You could also do images, just omit the above step.
Be sure to use tubes or images by the same artist.
8. When you have them positioned as desired, merge the three layers and hit delete on your keyboard again.
Sharpen more, and if you used tubes, add a shadow of choice.
9. Drag the paper layer and the tubes layer below the frame layer.
Add a shadow to the frame layer and merge the 3 layers.
10.Position the elements you have already added to your image.
11. Now add the Halo re-sized to 35%, below the frame layer.
Use your freehand selection tool and select the front part of the Halo ,
You may have to re-do it several times, make sure you only select the front of the halo.
Once happy with the selection, promote selection to layer, drag the promoted selection above the frame layer,
It should look like the halo is hanging on your frame.
If you got some of the back of the halo or didnt get all of the front selected,
undo and try again. When your happy
select none.
12. Add one of the feathers as the top layer, I used feather # 3.
Re-size it by 65%, Add a shadow and position it at the bottom.
Duplicate it, Re-size the duplicate by 75%, mirror.
Repeat the above step once more, so you have 3 feathers that look like they are falling.
13. Add one of the clouds, I used #1. Re-size it by 75% twice.
13. Add one of the clouds, I used #1. Re-size it by 75% twice.
Duplicate it and position them side by side.
One overlapping or however you would like it.
Move it over and above the bottom frame.
Position it and then drag the feathers on top of it.
I re-sized the feather layer again by 85%.
14. Add the lace from the kit, re-sized by 45%. Mirror it and add a shadow.
Position it on one of the frames.
15. Open the wings #1, Use your freehand selection tool, to
select one of the wings and promote selection to layer,
on the original layer, hit delete. select none. Now the wings should be on different layers.
Copy and paste one of them as a new layer, Re-size it by 45%. Sharpen it and add a drop shadow,
Drag it under the frame layer on the appropriate side of the frame.
Repeat with the other wing.
16. Add more elements if desired.
17. Add your word art or type a sentament of choice.
18. Add your name, Mine is size 72.
Add an inner bevel and a drop shadow.
Delete the colored layer.
Delete the colored layer.
19. Save as a png,
And your done!
And your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Aged Beauty
This tutorial was written by Me.
On 7/31/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
You will need the Pay to use kit, Aged Beauty, designed by InzpiredCreationz.
You can purchase it here,
You can check out her blog Here.
You will need a tube of choice.
Im using Suzanne Woolcott.
You have to have a license to use her tubes or images.
Purchase her tubes here
Or use one of the posers provided with the kit.
The font I used is Some Weatz
Ok Ready?
1. Open a new image, 900 by 900, transparent.
2. Add frame #4 as a new layer. Sharpen and add a drop shadow.
3. Add the clock, Position it, Sharpen more and add a drop shadow.
4.Add clusters # 1 and 2. Sharpen more and add a shadow to each.
5 . Add the scattered hearts. Add a drop shadow.
6.Activate the frame layer. With your magic wand, click inside the frame as many times as needed to get the whole inside selected. expand the selection by 4. Add a paper of choice, invert the selection. Hit delete on your keyboard. Drag the paper layer below the frame.
Sharpen nore and colorize it using Image, Hue and Saturation.
Color of choice to match tube.
7. Activate the hearts layer, duplicate, Position on either side of frame.
8. After you position them, merge them down.
9. Add a word art from the kit, sharpen and add a shadow. Arrange the tag as desired.
10. Add your tube. Sharpen if desired and add a shadow.If desired, drag the tube below the frame layer.
11. Re-size all layers checked, to 600 pixels.
12. Add your copy wright info and taggers mark if you use one
13. Add your name, font Some Weatz with Swashes size 24.
13. Add your name, font Some Weatz with Swashes size 24.
Add a drop shadow.
14. Save as a png,
And your done!
And your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Tuesday, July 30, 2013
Tattoo
This tutorial was written by Me.
On 7/29/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
Check out his website here
You will also need a round mask of choice,
I am using one by Vabys
I am using one by Vabys
Check out her blog here
She has some great ones!
Ok Ready?
1. Open frame #1, Shift +D to duplicate it.
Re-size by 85%, all layers unchecked.
2.Sharpen and add a drop shadow with these settings:
3, -3, 50, 15, black. This is the settings I used through the tag for the shadows.
3. Click inside the frame,you will have to click more than once to get the whole inside selected.
Paste a paper of choice as a new layer, invert selection and hit delete on your keyboard.
Drag below the frame layer and merge these 2 layers.
4. Open paper 7. Copy and close it.
5. Add a new layer to your tag and drag it to the bottom,
select all and paste the paper into the selection, select none.
Load your mask and merge group.
6. Re-size the frame layer by 85%.
7. Decorate your frame with some elements from your kit.
I added the three hearts (elements #17, 17a,and 17 b).
Re-sized by 35%. Position along the side of the frame,
I added the shadow to each element.
8. I repeated the above step with element # 11, and element # 20.
After your little cluster is done and positioned as you would like it.
9. Add the cluster frame #1, re-sized by 75%.
Position as desired, sharpen and add the shadow.
10. Add one of the paint drop elements,
I added # 22, Paste it on top of the frame layer for now.
I had to duplicate mine to get it to show from the top and bottom.
Re-size if needed. Drag it to the bottom.
11. Add your tube, sharpen and add a shadow.
12. Add your copy wright. And your taggers mark if desired.
13. Activate the eclipse tool, draw a circle the size and shape of the frame,
grab your text tool and move your curser over the eclipse, you will see a half circle icon,
when you see that start typing your name,
I used the font CUTE TATTOO.
Size 72.
When you are finished typing, click the plus sign next to the vector layer,
hide the eclipse layer, now all you see is the text.
While it is still a vector you should be able to move it around the side of the frame.(See my tag as reference)
14. When your happy with the placement, add your favorite text effects,
I did an inner bevel, a white grad glow and the shadow.
14. Crop away the excess canvas, save as a png,
And your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Monday, July 29, 2013
Autumn Blessings
72813.png)
This tutorial was written by Me.
On 7/29/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
You will need the Pay to use kit, A unicorns Realm, designed by FwTags Creations.
You can purchase it here,
or here
You can check out her blog Here.
You will need a tube of choice.
Or use one of the posers provided with the kit.
My alpha here
My word art:
Ok Ready?
1. Open paper #4, copy and close it.
2. Open a new image, 600 by 600, transparent.
Select all, Paste into selection and select none.
3. Load the mask and merge group. Duplicate it twice and merge visible.
4. Paste the paper again as a new layer and drag it to the bottom. Merge visible again.
5. Open the sunflowers,element # 32. Copy and paste it as a new layer. Re-size by 65%.
Add an inner bevel and a drop shadow. Move this to the bottom of the canvas, duplicate it and re-size it by 85% move it to one side of the larger flower and duplicate the smaller one again. Move it to the other side of the larger flower. Merge these three flower layers, once they are positioned as you would like.
6. Open element #46, Use the selection tool or eraser tool to get rid of the strings at the top and in the middle of the heart.
Copy and paste it on top of the sunflowers. Sharpen more and add a drop shadow.
Rotate it to the left by 20. Duplicate and mirror. Position them overlapping a bit.
Use selection tool to select the part of the top heart that overlaps the bottom,
promote selection to layer, drag below the bottom heart. On the top layer hit delete on the keyboard. Merge all 3 layers.
7. Paste element #36 as a new layer and re-size it by 65%, sharpen and add a shadow.
Position in the middle of the canvas, on top of the sunflowers and hearts.
Sharpen and add a shadow.
8. Repeat with element #30.
9. Duplicate element 36, drag it above the flower layer and move it just a tad higher than the first grass layer.
10. Add my Autumn blessings word art or make your own.
11. Open the alpha, copy and paste each letter of your name as a new layer,
re-size each if desired, Add an inner bevel to each and a drop shadow.
Arrange each as desired, and merge the name.
Feel free to add a texture, filter or whatever to the alpha, but please do not claim it as your own.
12. Add your tube and copy wright. And your taggers mark if desired.
13. Activate the bottom layer and load the round mask.
Merge group.
14. Crop away the excess canvas, save as a png,
And your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
A Unicorns Realm alpha blog freebie
72813.jpg)
A Friend
72813.png)
This tutorial was written by Me.
On 7/29/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
You will need the Pay to use kit, A unicorns Realm, designed by FwTags Creations.
You can purchase it here,
or here
You can check out her blog Here.
You will need a tube of choice.
Or use one of the posers provided with the kit.
The font I used is Garfield the Cat
Ok Ready?
1. Open a new image, 600 by 600, transparent.
2. Open element # 38, thee patch of grass. Resize it to 700 pixels wide, copy and paste it as
a new layer. Re-size again by 85% Sharpen and add a drop shadow.
3. Open element # 55, the rock path. Re-size by 50 %, copy and paste it as a new
layer, re-size again by 45% and mirror it.
Add a shadow.
4. Open element #10, the house, Re-size it by 50%. Paste it as a new layer. Add a shadow.
5 . Open element #. 72, the fence. Paste it as a new layer and re-size it by 85%,
Add a shadow.
6. Open element # 46, the heart. Grab your freehand selection tool. Carefully draw a selection around the string, at the top of the heart and inside the heart.
Hit delete on your keyboard.
Copy and paste it as a new layer, re-size it by 50%.
Rotate it to the left by 20.
Position it and sharpen more, add a drop shadow.
7. Use the selection tool again, draw a small selection around the part of the heart that is directly on top of the fence. Promote selection to layer and drag the promoted layer below the fence.
On the original heart, hit delete on your keyboard.
8. Paste element # 4, one of the birds, as a new layer. Re-size it by 35%,
Sharpen and add a drop shadow. Position it on the fence.
9. Open element # 36, the grass, re-size it to 700 pixels wide.
Paste as a new layer and re-size again, this time by 85%.
Sharpen it and add a shadow to it, drag this layer below the fence layer.
10. Repeat the above step on element # 30, the flowers.
But, this one needs to be above the fence layer. And I left it above the heart layer also.
11. Add your tube and copy wright. Sharpen if needed and add a shadow.
position as desired.
12. Add your name, Add your favorite text effects, I only added an inner bevel and a
grad glow.
13. Add your quote or use mine,
just right click and save.
13. Add your quote or use mine,
just right click and save.
Add any text effect you would like to the poem.
14. Save as a png,
And your done!
14. Save as a png,
And your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Sunday, July 28, 2013
Curvey Girl
72813.png)
This tutorial was written by Me.
On 7/28/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
You will need the Free to use kit, Sexy Bad Girl, designed by FwTags Creations.
You can download it here.
You can check out her blog Here.
You will need a tube of choice.
I am using a tube by Elias Chatzoudis,
you can purchase it here
The font I used is Water Font
and
you will also need the mask by Vaybs
#59
Ok Ready?
1. Open paper #2. Shift + D to duplicate
2. Promote background to layer and re-size, all layers un-checked,
by 75%.
3. Add a radial blurr to the paper layer.
4.Load mask and merge group.
5. Paste your tube as a new layer and add a drop shadow of choice.
6. Paste element # 12.
Drag it below the tube layer.
Take your freehand selection tool and select a part of the chain element around her legs.
You want it to look like shes standing inside the chain. Promote the selection to layer and drag promoted selection layer above the tube.
7. Open both of the hearts (#'s 25 and 26).
Copy and paste both of them as new layers under the tube. and above the chain element. Re-size the top one by 75%. Add a heavy drop shadow.
8. Add the skyline element above the mask layer. position it at the bottom and the center.
9. Add the 2 word arts and position them as desired.
10. Decorate your tag with more elements from the kit.
11. Add your text, I typed, "Real girls have Curves".
Add an inner bevel and a drop shadow.
12. still with your text tool, Set your f/g to a dark color from the tag and set the background
to pattern and use the other paper for the pattern.
Type your name in the other font and add the text effects you want.
13.Crop the excess canvas from around your tag. Be sure not to cut
off any of the mask.
14. Add your copy wright and taggers information now.
15. Re-size the tag, all layers checked to 700 wide.
And your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Under the sea
This tutorial was written by Me.
On 7/28/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
You will need the scrap kit Scuba Babe, designed by CandyCats.
You can purchase it here.
You can check out her blog Here.
You will need a tube of choice.
You will need a tube of choice.
I am using a tube by Zlata_M
I got it at Scraps in the city
The font I used is Water Font
And my word art here
Ok Ready?
1. Open frame #4 and shift + D to duplicate.
2. Grab your magic wand and click inside the frame.
Expand the selection by 4.
3.Add a new layer and drag it below the frame,
Open background #3. Copy it and close it.
Paste it into selection.and select none.
4. Paste a few of the sea plants below the frame.
Re-size and position them as desired. Sharpen and add a shadow.
Its ok if they dont fit inside the frame.
Once positioned as desired. Merge them down and activate the paper layer.
5. Grab your magic wand and click outside the paper anywhere to select.
Now activate the plants layer again and hit delete on your keyboard. Select none.
(If you would like to add any thing else under the sea...so to speak...do it now.)
6.If you want to use my word art, apply it now. I put it under the frame layer.
Once you have everything you want added.
Merge visible.
7. Paste the sun and drag it to the bottom.
Duplicate it and on the original layer,
apply a radial blurr.
8. Add the cloud layer on top of the sun layer. and duplicate it a few times.
I used both the cloud elements in the kit. And had the clouds over the sun so it looked like the sun was peeking through the clouds.
9. Decorate your tag with more elements from the kit.
10. Add your tube now.
11. Now re-size all layers to 600 x 600.
12.Now add your copywright and taggers mark.
13. Add your name in your choice of fonts, add your
favorite text effects.
And your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Sexy Bad girl Cluster Frame blog freebie
Sexy Bad girl Word Art blog freebie
Under the sea blog freebie
Thursday, July 25, 2013
FreekNPunk
This tutorial was written on 07/25/2013, By Kelli.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
You will also need 2 fonts of choice.
True Stories and Sweet Love.
You will need a tube of choice or just use the posers included in the kit.
A mask of choice if desired.
Ok Ready?
1. New image 700 wide by how ever tall you want it.
2.With True Stories font, type out the word you want to use.
I typed "PUNK".
Add any text effects you want now.
3. Decorate the word with some elements from the kit.
Don't forget to sharpen if needed and add a shadow to each.
4. Add your tube of choice or just use the awesome posers provided in the kit.
Don't forget to add your copy wright and taggers info at this time.
5. Add your name in the Sweet Love font. Start and end with a Period.
So you will have a heart on each end. Add your favorite text effects now.
6.**Optional**Add a new layer and select all. Drag it to the bottom. Paste a paper of choice into the selection.
Select none and load a mask of choice. Merge group.
And your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Hot Stuff
This tutorial was written on 07/25/2013, By Kelli.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
You will also need a font of choice.
I used Miss Fitzpatrick.
You will also need a round mask of choice,
Vaybs has some great ones!
Vaybs has some great ones!
I used her mask # 105.
Check out her blog here
And the Template Here
# 56.
Ok Ready?
1. Ope the template and Shift + D to duplicate. Close the original template.
2.Re-size all layers checked to 600 x 600,
And then go to images canvas size and make the canvas size 700x700.
3. Starting on the bottom layer on the template,
select all, float and defloat, then invert the selection. Paste a paper of choice as a new layer and hit delete on your keyboard.
Delete the template layer, under the new layer you just made.
Repeat this step on all of the template layers.
Except for the text layer.
Add a gradient glow to each of these new layers.
4. Colorize the text layer, by going to adjust, and hue and saturation.
My settings are:
Hue = 141, ans Sat = 149.
5. Decorate with elements from the kit. You could even add the same grad glow to some of the elements, I only added a drop shadow.
6.Add your tube and copy wright now. As well as your taggers mark if you use one.
7.Activate the bottom layer and select all. Paste a paper of choice into the selection.
Select none and load your mask. Merge group.
8. Now use your pen tool to draw a few lines through the part of the text layer that says "Mess".
9. Grab your text tool and type "Stuff", using a big, bold font. Add any effects you want to it and then place it over the word mess.
10.Add your name in a pretty, delicate , scripty font.
Then add a drop shadow to the name layer.
And your done!
And your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Friends Forever
This tutorial was written by Me.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
The font I used is Miroh
you can find it here.
You will also need a mask of choice,
Vaybs has some great ones!
Vaybs has some great ones!
Check out her blog here
Ok Ready?
1. Open the round frame word art. Shift + D to duplicate. Close the original. Resize it all layers checked to 600 by 600 pixels.
Now re-size just the word art, by 85%.
2. Add a new layer and select all. Paste a paper of choice into the selection.
Load your mask and merge group. Re-size it to fit inside your wordart layer.
Sharpen and give a shadow to the mask layer.
3. Paste frame 1 or 2 as new layer.
Rotate the frame to the right by 90.
Position it as desired. I liked it in the middle.
4. Grab your magic wand and click inside each of the three frames. Make sure you get the whole inside selected. Expand the selectroin by 3. Paste a paper as a new layer. Invert selection and hit delete on our keybosrd.
Drag below your frame layer.
5. Add your tube or tube of choice. Dont forget the all important Copy wright info, and your
taggers mark.
6. Add your name in your choice of font.
7. Add your favorite text effects.
And your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Precious Moments
This tutorial was written by Me.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
The font I used is Miss Fitzpatrick
But any scripty font will work.
You will also need a mask of choice,
Vaybs has some great ones!
Vaybs has some great ones!
Check out her blog here
Ok Ready?
1. Open one of the curtains. Shift + D to duplicate. Close the original. Resize it all layers checked to 700 pixels wide.
Load your mask on this layer. Merge group. Sharpen and add a shadow.
2. Open frame # 1 or #2. Copy and paste it as a new layer. Re-size by 45%. Repeat the re-size if desired.And then Rotate it to the left by 20. Add a shadow of choice.
3. Grab your selection tool set to freehand and point to point.
Draw a selection around the frame.
Paste a paper of choice as a new layer. Invert the selection and hit delete on your keyboard.
Add your tube, arrange as desired. Again hit delete on your keyboard. And now select none.
Drag the paper and tube layer below the frame layer.
Merge these 3 layers together.
4. Paste flowers 1 and 2 as new layers and re-size each by 65%
and add a drop shadow. arrange them below the frame layer.
5. Paste stars one and two as new layers. Re-size them, sharpen and add a drop shadow.
Position them as desired.Re-size them again if desied.
6. Decorate your tag with more elements from the kit.
7. Add copy wright info and your taggers mark.
8. Add some word art from the kit or make your own.
Add text effects as desired. Position.
9. Add your name and your favorite text effects.
And your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Wednesday, July 24, 2013
Wish you were here
This tutorial was written on 07/22/2013, By Kelli.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
The font I used is Cutie Patootie
Get it at DaFont.
Ok Ready?
1. Open Frame Number 1, Shift D to duplicate it.
Re-size the image size to 700x700 all layers checked.
Then resize jut the frame layer by 65% .
2. Grab the magic wand and click inside the frame, expand the selection by 4.
Paste a map paper as a new layer. Invert the selection and hit delete on your keyboard.
3. Copy and paste the postcard. Position it as desired.
4.Add some text to the post card.
5. Add frame #3 as a new layer. Re-size it as desired. Grab your magic wand and click inside the frame.Now expand the selection by 4. Add a new layer and paste a paper of choice into the selection.
6.Open your tube and re-size it as needed. Rotate it if needed to match the frame.
Paste it as a new layer under the frame. Invert selection and activate the tube layer. On your keyboard hit delete. Select none.Merge the small frame tube and small paper layer together.
7. Decorate the tag with several elements from the kit. Add a shadow to each individual element.
A few of the elements on my tag are from the tube. So they wont be included in the kit.
8. Add © info now and your taggers mark if you use one.
9. Paste prints numbers 1 and 2 as new layers and drag the to the bottom. They will be the background of your tag.
10. Add your name in a solid color.
The first letter is done in upper case, and a largr size and then convert it to a raster layer.
Then type the rest of the name in lower case and with the same font only a different size.
Rotate the lowercase letters to the left by 20.
And your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Subscribe to:
Posts
(Atom)
My Blinkie
