Layouts by Millie
I CT For
blog train
Showing posts with label Alika's scraps. Show all posts
Showing posts with label Alika's scraps. Show all posts
Thursday, September 12, 2013
Pretty Princess
This tutorial was written by Me,on 9/11/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
Scrapkit: Eve's Garment, by Alikas scraps
You can purchase it at : Pimp My Tags w/ Scraps
tube: Caron Vinson
Fonts I used: For © Fff urban And for the name Janda CurlyGirl
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
Scrapkit: Eve's Garment, by Alikas scraps
You can purchase it at : Pimp My Tags w/ Scraps
tube: Caron Vinson
Fonts I used: For © Fff urban And for the name Janda CurlyGirl
Kylie_mask 02
Ok, Ready?
Open a new image, 800 by 800, transparent.Flood Fill it with a gradient. I used Landscape, style linear.
Angle and Repeat set at 0.
Load the Kylie_mask 02, from image,Source luminance checked,Invert selection un-checked.
Merge group and re-size the mask layer by 85%.
Add element #11 as a new layer and mirror. Position as desired, add a drop shadow of choice.
Add element #26,Position it as a new layer and add a shadow of choice.
Add element #03 as a new layer, re-size it by 115%, Sharpen. Add a drop shadow.
Grab your magic wand and click inside the little window.Expand the selection by 3.
Paste a paper as a new layer, invert the selection and hit delete on your keyboard.
Contract the selection by 3. Activate the element again and apply a drop shadow.
Select none.
Add element #42, re-size by 65%, Sharpen more.Arrange it between the paper layer and the element layer, part of it will show to the side of the element.
Merge these three layers.
Add element #21, Re-size it by 200%, sharpen.I added the high pass sharpen with the default settings.
But you could just sharpen and then add a drop shadow.
Add your tube and ©, and your taggers info.
Merge visible, select all. Float the selection and then defloat.Go image and crop to selection.
Add your name in the Sesame Shadow font. Convert to raster layer, grab your magic wand and click outside the name. You will also need to click inside any holes in the letters, (a's,e's,o's...)Expand the selection, by 2. Add a new layer and paste a paper as a new layer.Selections invert and make sure the paper layer is still activated. Hit delete on your keyboard.
This should fill the name outline. Merge down.
Re-size and position as desired. Add any text effects you like.
Save as a png and your done!
Thanks for trying my tutorial. I hope you are happy with your results,
I'd love to see them!
Hugs from Kel
Thursday, August 15, 2013
Sweet October
This tutorial was written by Me.
On 8/14/13.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
You will need the Pay to use kit, October Treats, Designed by Alikas Scraps
You can purchase the kit at Pimp My Tags W/ Scraps
You will need a tube of choice.
I'm using a tube by Caron Vinson,
You can purchase this tube at Creative Design Outlet
You need a font of choice for the name.
I used Sea Dreams
Ok Ready?
Paste element #14 as a new layer,
Grab your magic wand and click inside the frame, expand the selection by 2.
Paste a paper of choice as a new layer, invert the selection and hit delete on the keyboard.
Drag the paper layer below the frame, sharpen both the frame and the paper layer and add a shadow to the frame.
Repeat with the spider web element #41. Add a gradient glow to it.
Paste element 40 now and position to one side of the frame, just above the paper layer, Duplicate it twice, Position them as desired.Merge the three layers together.
Paste your tube of choice as a new layer and position.
Sharpen and add a shadow.
Add your copy wright at this time and dont forget your taggers mark if you use one.
Add your favorite elements from the kit.
This is your time to personalize the tag.
Add a glow or a drop shadow to each element.
Add your name in a font of your choice or use the one I have provided the link to.
I set the background to pattern and set a paper as the patern.
Stroke set to null. and add a gradient glow or drop shadow.
Crop away the excess canvas around your tag and
Save as a png,
And your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Sunday, June 30, 2013
Catnip
This tutorial was written on 06/30/2013, By Kelli.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
You will need the scrap kit By Alika's scraps.
Called Toxic Kitty
You can purchase the kit here
You can check out her blog Here.
You need to purchase this tube to use it.
You can buy it at Gorjuss art.com
You will also need a fat font of choice.
You will need a mask of choice.... I am using a round one.
Ok Ready?
1. Open a new image 600 x600, transparent.
2. select all and paste a paper of choice into the selection.
Load your mask and merge the group.
3. Paste cluster frame #1 as a new layer. Grab your magic wand and click inside of the two frames. Expand the selection by 3.
4. Add a new layer and paste another paper of choice into the selection. Select none and drag the paper layer below the frame layer. Now ad a shadow to the frame layer.
5. Now paste your tube of choice as a new layer and add a shadow and position it as desired.
Don't forget to add your © info now.
6. Add the elements you would like to at this time.
7. Paste element 38 as a new layer. Add a shadow of choice.
8. Type your name in your choice of font. Add your favorite text effects. All I did was add a shadow. I positioned the name over the element so the wording didn't show.
And now your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Me and My Teddy
This tutorial was written on 06/30/2013, By Kelli.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
You will need the scrap kit By Alika's scraps.
Called Toxic Kitty
You can purchase the kit here
You can check out her blog Here.
You will also need a fat font of choice.
And you will need another font of choice to type your quote.
Ok Ready?
1. Open a new image 600 x600, transparent.
2. Open element #47 and paste it as a new layer. Re-size if desired. Sharpen it and add a drop shadow of choice. Position it in the bottom right corner of your canvas. Be sure not to get it too close to the edge,or part of it will be cut off when saved.
3. Open element #22. Paste it as a new layer. Sharpen and add a drop shadow.
Position it in the upper left corner of the canvas.
4. Now you will need to make the element cluser. Use whatever elements you want.
I choose 2 flowers. Elements #40 and #79. Paste them as new layers and resize them as desired.
When you have the cluster as you like it, add a drop shadow
to each individual element and merge them. Duplicate the cluster and position the two clusters as you would like.
You will re-position them again after the frame is in place.
5. Open element #58. Paste it as a new layer and re-size it x 75. Use the magic wand tool to click inside it. Expand the selection by 5 pixels.
6. Add a new layer and paste a paper of choice into the selection. Select none. And drag the paper layer below the frame layer. Now add a shadow to the frame layer.
Reposition your element clusters now.
7. Paste element # 81, as a new layer. Re-size it if desired, sharpen and add a drop shadow of choice. Position it at the top of your frame.
8. Paste element # 56 as a new layer and position it to the left side of the frame. Add a droop shadow.
9. Paste the teddy bear (element #26) as a new layer. Add a drop shadow and position it.
10. Grab your text tool and font of choice.
Type "Me and my Teddy".
Or you could type " Me and my best teddy bear."
Add your favorite text effects and position it as desired.
11. Now choose a fat font of choice and type your name.
Foreground is set to a solid color to match your tube, and the background is set to pattern.
Use a paper of choice.
Add your choice of text effects. I added a grad glow and a drop shadow.
And now your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Wednesday, June 19, 2013
Dangerous
This tutorial was written on 06/19/2013, By Kelli.
Please don't copy it or claim it as your own or post it through any group.
You may link back to my blog.
Any resemblance to any other tutorial is strictly coincidental.
It is written assuming you have a basic knowledge of psp and its tools.
It is written using psp X5 but should work in any other version.
You will need a tube of choice.I am using a tube by Steve Baier.
You must purchase this tube to use it.
You can do so at Up Your Art, here
You will need the scrap kit Called Cat Attack
by Alika's Scraps
Buy it at Pimp my tags/with scraps here
You can check out her blog Here.
You will need a font of choice or if your using this kit you can use the alpha that is included.
You will need a mask of choice.I used #81 from Weescottlass creations here
You will also need a font of choice. I used Doctor Fibes.
You can download it here
Ok Ready?
1. First open a new transparent image 700 x 700.
2. Open the frame (as11) .Re-size it to 500 pixels wide. Paste it as a new layer.
3.Use your selection tool set to freehand, to draw a selection around each of the 4 openings in the frame. Add a new layer and drag it below the frame layer.Copy and paste a paper of choice into selection. Select none.
4. Open The Stars (as 01). Copy and paste it as a new layer. Re-size by 70% Twice. Use your selection tool set to freehand to promote each star onto its own layer.
Sharpen and add a drop shadow to each star. When happy with it. Merge visible.
5.Add each of the following elements to your tag:
as 68
as 70
as 73
as 37
as 74
as 75
6.Add a new layer, contract the selection by 40.Open a paper of choice, copy and paste it into the selection on the new layer. Select none.
7. Open the mask and load it from image. Merge group, drag it to the bottom of the layer palette.
8.Now arrange your tag. Use mine as a guide.
9.Open another paper of choice.Grab your text tool. Set a pattern in your background.Foreground set to a solid color of your choice. Stroke width set to 3. I used the font Doctor Forbes.
12. Add your tube and ©and your taggers mark if desired.
13. Merge visible, select all, selections float, selections defloat.
Now go to image and crop to selection.
And now your done!
Thanks for trying my tutorial!
I hope you are happy with your results!
Subscribe to:
Posts
(Atom)
My Blinkie
